Synthesis and properties of new crystalline poly(arylene ether nitriles)

Crystalline poly(arylene ether nitrile) could be prepared by the polycondensation of 2,6-dihalobenzonitrile with resorcinol at 200°C in N-methylpyrrolidone in the presence of sodium carbonate. A reaction temperature of at least 200°C was necessary to attain high molecular weight polymer. Spectral data indicated that the polymer had the structure of a poly(meta-phenylene ether) with pendent nitrile groups on every other phenylene unit. Despite this structure, the crystallinity and the crystallization rate of the polymer were greater than those of the corresponding polymer with a para-linked structure. The glass transition temperature and the melting temperature of the polymer were almost the same as those of poly(etheretherketone) (PEEK^TM). A series of other new poly(arylene ether nitriles) were also examined. The polymers derived from 4,4′-biphenol, dihydroxytetra-phenylmethane, dihydroxydiphenylsulfone, and 1,5-isoquinolinediol had high glass transition temperatures. The poly(arylene ether nitriles) exhibited excellent tensile strength compared with the corresponding ketone- or sulfone-containing polymers. Comparing the three different kinds of polymers containing the same bisphenol units, the order of glass transition temperature was found to be sulfone- > nitrile- > ketone-containing polymers, while the order of tensile strength was nitrile- > ketone- > sulfone-containing polymers. The excellent mechanical properties are attributable to dipole-dipole interactions of nitrile groups. © 1993 John Wiley & Sons, Inc.     

Highly Efficient One-Pot Synthesis of 2-Arylmethyl N-Substituted Anilines via Yb（OTf）3 Catalyzed Three-Component Reaction

An efficient method has been developed for one-pot three-component coupling reactions of various aldehydes, 1-cyclohexen-2-one, and primary or secondary amines in the presence of a catalytic amount of Yb（OTf）3 under mild conditions to afford the corresponding 2-arylmethyl N-substituted anilines in good yields. In addition, the catalyst was easily recovered and could be reused for at least four cycles without any loss of activity.     

胺类化合物与4，4’-二氟苯偶酰的亲核取代反应研究

应用胺类化合物与4,4'-二氟苯偶酰的亲核取代反应合成了多种对称或不对称的4,4'-双(二烷氨基)苯偶酰.结构经元素分析,IR,1H NMR和MS确定.其中伯胺与4,4'-二氟苯偶酰的反应得到了一边取代、另外一边形成亚胺结构的产物,并对此反应机理进行了探讨.     

2-取代吡啶半菁染料的无溶剂微波合成及光谱性质的理论研究

在微波促进无溶剂条件下, 由N-甲基-2-甲基吡啶碘盐与取代芳香醛在哌啶作用下合成了一系列2-取代的吡啶半菁染料, 产物结构由元素分析, ¹H NMR, MS, IR, UV得到确认. 该方法操作简便, 收率高. 在此基础上, 对N-甲 基-2-(p-N,N-二甲氨基-苯乙烯基)吡啶半菁染料的光谱性质进行了理论计算.     

An efficient route to regioselective opening of N-tosylaziridines with zinc(II) halides

An efficient route for the regio- and stereoselective ring opening of N-tosylaziridines with zinc dihalides (ZnX₂, X = Cl, Br, I) is described. Depending on the solvent and Zn(II) halide, β-halo amines or imidazolines are obtained selectively in good to excellent yields.     

手性芳酰胺类分子钳的设计与微波合成

以间苯二甲酸为隔离基, 酰胺键桥联L-氨基酸甲酯构成手臂, 在微波辐射下合成了具有不同手性中心和裂穴的新型手性芳酰胺类分子钳. 结构均经¹H NMR, IR及元素分析确证, 并考察了其对芳香胺类化合物和D/L-氨基酸甲酯的识别性能. 初步研究表明, 这类分子钳受体不仅对中性小分子具有优良的识别性能, 其结合常数(K_a)可达2.66×10³ L•mol^－1, 而且对D/L-氨基酸甲酯亦具有良好的手性识别能力.     

Preparation and characterization of aliphatic/aromatic copolyesters based on 1,4-cyclohexanedicarboxylic acid

A series of biodegradable aliphatic/aromatic copolyesters, poly(butylene terephthalate)-co-poly(butylene cyclohexanedicarboxylate)-b-poly(ethylene glycol) (PTCG), were prepared by a two-step melt polycondensation method and characterized by means of GPC, FTIR, NMR, DSC, TGA, etc. The effects of aliphatic ester content on the physical, mechanical and thermal properties, as well as in vitro and in vivo degradation behaviors were investigated. The decrease in mechanical strength was observed with an increase in poly(butylene cyclohexanedicarboxylate) (PBC) molar fraction. DSC results showed one melting point and two glass transition temperatures in all samples, and the melting temperature was found to go down gradually as more cyclohexanedicarboxylic acid (CHDA) was added. During the in vitro and in vivo degradation processes, erosion of the surface was dominant as evidenced by scanning electron microscopic observations. The copolyesters containing many CHDA units were featured by the higher water uptake and faster degradation due to much richer amorphous phase within them.     

极化效应指数与脂肪族胺、醇和醚气相碱性的关系

脂肪族胺、醇和醚的气相质子亲合能(PA)与N, O原子所带电荷(qx)以及烷基的极化效应指数(PEI)的关系可表示为其中a、b、c为系数。回归分析结果表明, 上式较好地表达了脂肪族胺、醇和醚的气相碱性变化规律。     

官能化蒙脱土负载双金属催化芳香氯化物水相脱氯

用PVP(聚乙烯吡咯烷酮)络合双金属Pd^2 ,Sn^4 后，再负载于用PEG400(平均分子量为400的聚乙二醇)官能化的蒙脱土上，制成双金属催化剂PVP—PdCl2-SnCl4/Montk10-PEG400,用于催化难溶于水的芳香卤化物水相脱卤，芳香族氮化物转化率达100％，该催化剂可重复使用。对催化剂进行了IR及TEM表征。     

Convenient synthesis of α-trifluoromethyl amines via aminofluoroalkylation of arenes with N-trimethylsilyl α-trifluoroacetaldehyde hemiaminal

Aminofluoroalkylation of various heteroarenes or substituted benzenes with the N-trimethylsilyl hemiaminals, prepared from 1,1,1,3,3,3-hexamethyldisilazane and gaseous trifluoroacetaldehyde, smoothly underwent at room temperature in the presence of a Lewis acid. [(1-Aryl-2,2,2-trifluoro)ethyl]amines or bis[(1-aryl-2,2,2-trifluoro)ethyl]amines were afforded in moderate to high yields.